SSD2805CG39

 SSD2805CG39  - Transmission Rates up to 700Mbps over 2 Data Lanes, Supports 16/18/24-bpp Display for Both MCU & RGB interfaces

Solomon Systech MIPI Master Bridge Chips SSD2805/SSD2825/SSD2828 support high-speed, low-power displays in application-rich mobile devices.

SSD2828 is able to support display resolution of up to WUXGA (1920x1200), while SSD2825 and SSD2805 are able to support display resolutions of up to WXGA (1280x800) and WVGA (480x854) respectively. All ICs adopt the physical layer of low voltage differential signaling as defined by MIPI specifications.

SSD2805/SSD2825/SSD2828 are versatile enough to be interface with most baseband processors, application processors or co-processors now deploying in mobile products. SSD2805/SSD2825/SSD2828 are able to operate in both High-Speed (HS) and Low-Power (LP) modes for data transmission to provide optimum power consumption, and will consume ultra-low power in the idle state. It contains an on-chip PLL for clock generation.

Features

Support MIPI specification with maximum 4-lane

Supports MCU interface of 8/16 bits (6800 and 8080), RGB interface

(16/18/24 bits) and SPI interface (8-bit 3-wire, 8-bit 4-wire, or 24-bit 3-wire)

Support 16/18/24 bit-per-pixel

Support dual panel update

Support High-Speed (HS) and Low-Power (LP) Mode for data transmission

Support ultra-low Power Mode in idle state

Support both Command Mode and Video Mode in MIPI DSI standard

Support bi-directional data transfer (forward link in High-Speed and Low-Power Modes and reverse link in Low-Power Mode)

On-chip PLL: reference input clock frequency: 10-20 MHz

Power supply: 1.2V +/- 10% for Internal Circuit: 3.3V/1.8V +/- 10% for I/Os

【買家必讀】：電子元器件是專業型的產品，技術含量較高，本身可能存在多種品牌，後輟與封裝，可能導致參數與性能的差異，如有不慎，很有可能導致元器件購買錯誤，為了更好的解決您的問題，所以請您務必在下单前，將產品的封裝、後綴告訴我們。以便我們能準確迅速的为您查询。。